4 unitiqute 2 setup, 1 the setup home menu, 2 the language menu – Naim Audio UnitiQute 2 User Manual
Page 11: 3 the inputs menu, Uniti qute 2 setup
9
4.2 The Language Menu
The Language setup menu
enables the UnitiQute 2 user
interface language to be
changed. Enter setup mode
and use the handset
ok/list
key
to select
Language
. Use the
handset
up
(
5
) and
down
(
6
) and
ok/list
keys to select
a language. Exit setup mode by pressing the handset
exit
key.
4.3 The Inputs Menu
The Inputs setup menu enables
a variety of parameters to be
specified for each UnitiQute 2
internal source and external
input. These parameters define
how control of UnitiQute 2
inputs behaves. The options
available for each are described
in the following sections. Three
parameters are common to all
inputs:
Enabled:
Switches the input on or
off and displays or hides any associated menus.
Name:
Enables user specified names to be attached to
inputs. Use the handset to enter text.
Input Trim
: Enables the relative level of each input to
be adjusted so that each is of an approximately equal
volume. Adjust using handset
6
or
5
key.
4.3.1 FM Input
Parameter Options
Enabled:
Yes / No
Name:
User definable
Input Trim:
±10dB
Seek Lock:
Low / Medium /
High. Sets the FM signal strength required
for the UnitiQute 2 tuner to identify an FM
station.
UnitiQute 2 Setup
4 UnitiQute 2 Setup
Once UnitiQute 2 is installed with mains power, speakers, a radio aerial and any external
input connections made, it can be switched on and set up for use.
The degree to which you modify the UnitiQute 2 default settings will depend upon the uses
to which you put it and the extent to which you use its capabilities. It may be that you
have no need to modify the default settings at all, however we would encourage you to
read this section of the manual in order that you gain a full understanding of the UnitiQute
2 abilities. The following paragraphs describe each UnitiQute 2 setup menu in turn starting
with the setup home menu.
Enter UnitiQute 2 setup mode by pressing the handset setup ( ) key. Navigate around
the setup menus using the handset arrow keys and make selections using the ok/list key.
Exit setup by pressing the exit key.
4.1 The Setup Home Menu
The UnitiQute 2 setup home
menu provides access to ten
setup menus. The function of
each menu is as follows:
Language:
Enables the
UnitiQute 2 user
interface language to be changed.
Inputs:
Enables various parameters for each
internal and external input to be
configured.
Speakers:
Configures UnitiQute 2 speaker output
options.
Headphones:
Configures UnitiQute 2 headphone output
options.
Network Settings:
Configures UnitiQute 2 network
connection settings.
Digital Output:
Configures UnitiQute 2 digital output
settings.
Front Display:
Configures UnitiQute 2 display features.
Clock & Alarm:
Configures the clock and alarm.
Handset Keys:
Enables UnitiQute 2 inputs to be assigned
to
specific handset keys. Also enables
configuration of the handset
navigation (
3456
) keys.
Factory Settings:
Enables interrogation of UnitiQute 2 status,
deletion of all user presets and return to
factory default settings.
Each of the ten setup menus is described in detail in the
following sections. Use the handset
up
(
5
) and
down
(
6
)
and
ok/list
keys to select a setup menu.
Setup 1/10
4
Language
Inputs
Speakers
Headphones
Select Input
1/11
4
FM
DAB
iRadio
UPnP
FM 1/4
4
Enabled: Yes
Name:
FM
Input Trim:
0
Seek Lock:
Medium
Language 1/6
4
English
Deutsch
Français
Español
FM 4/4
Enabled:
Yes
Name:
FM
Input Trim:
0
4
Seek Lock:
Medium