Nexen RSD200 964533 - Manual (Page 6)

FORM NO. L-21195-A-0904 6
RSD200 REGISTER MEMORY MAP
REGISTER ADDRESS DESCRIPTION HMI FUNCTION
SETUP
10 Restore Default Values Write Only
11 Load Communication Parameters Write Only
12 Stop Bits: 1, 2 Read & Write
13 Device Address: 1–247 Read & Write
14 Baud Rate: 9600, 19200, 38400 Read & Write
15 Parity: 0–none, 1–odd, 2–even Read & Write
16 Torque Actuator: 1–brake, 2–drive Read & Write
17 Application: 1–unwind, 2–wind Read & Write
18 Minimum Output: 0–100% Read & Write
19 Maximum Output: 0–100% Read & Write
20 Stopped Output: 0–100% Read & Write
CALIBRATION
D ANCER R ANGE
21 Read Maximum Storage Position Write Only
22 Read Minimum Storage Position Write Only
W EB T ENSION
23 Minimum Arm Pressure: 1.0–100.0 psi Read & Write
24 Minimum Web Tension: 1.0–500.0 lbs Read & Write
25 Maximum Arm Pressure: 1.0–100.0 psi Read & Write
26 Maximum Web Tension: 1.0–500.0 lbs Read & Write
T UNING
27 Gain: 0.1–10.0 Read & Write
28 New Roll Adaptation: 2–100 Read & Write
29 Setpoint: 1–100% Read & Write
30 Dampening: 1–7 Read & Write
31 Minimum Adaptation: 2–20 Read & Write
32 Maximum Adaptation: 2–100 Read & Write
33 Adaptation Rate: 2–50 Read & Write
C ONTROL
34 Web Run/Stop: 0–stopped, 1–running Read & Write
35 Splice: 1–splice, reset adaptation Read & Write
36 Auto/Man: 1–manual, 2–automatic Read & Write
37 Output: 0–100% Read & Write
38 Dancer Position: 0–100% Read Only
39 Adaptation: 0–100 Read Only