dbx Pro 4800 - Manual (Page 87)

DriveRack ® 4800/4820 User Manual
®
Factory Reset Information
In the event that a reset is required, the DriveRack 4800/4820 offers you the option of performing a
“Hard” or “Soft” Factory Reset.
Power-Up Button Functions
All Power-Up Functions will use the MUTE 1 through MUTE 8 buttons. All Power-Up Functions
require a button(s) to be pressed and held as the unit power is turned on.
A. “Hard” Factory Reset
Press and Hold the button at power-up until the following message appears:
“! HARD RESET?”
“Yes ”
“No ”
Pressing the button will perform a System Reset, resetting all device Presets and Attributes.
Pressing will abort the Factory Reset sequence and the unit will reset normally.
B. “Soft” Factory Reset
Press and Hold the button at power-up until the following message appears:
“! SOFT RESET?”
“Yes ”
“No ”
Pressing the button will start a System Reset, resetting the device Attributes but maintaining
the User Presets.
Pressing the button will abort the System Reset sequence and the unit will reset normally.
Appendix
77
DriveRack ®
A.9 - Factory Reset