Dodge 2004 Ram SRT-10 - Manual (Page 198)

JACK LOCATION
Removal
The jack and jack tools are stored under the front passen-
ger seat. Lift the flap on the side of the seat for access.
Remove the jack and tools by removing the wing bolt and
sliding the assembly from under the seat.
WARNING!
The jack is designed to use as a tool for changing
tires only. The jack should not be used to lift the
vehicle for service purposes, unless suitable sup-
ports are placed under the vehicle as a safety mea-
sure. The vehicle should be jacked on a firm level
surface only. Avoid ice or slippery areas.
WARNING!
After using the jack and tools, always reinstall them
in the original carrier and location. While driving
you may experience, abrupt stopping, rapid accelera-
tion, or sharp turns. A loose jack, tools, bracket or
other objects in the vehicle may move around with
force, resulting in serious injury.
1500 Model Vehicles
198 WHAT TO DO IN EMERGENCIES