Dodge 2004 Ram SRT-10 - Manual (Page 118)

There are stampings in the sheet metal on the inner side
bulkheads of the box in front of and behind both wheel
housings. Place wooden boards across the box from side
to side to create separate load compartments in the
pickup box.
There are four tie-down cleats bolted to the lower sides of
the pickup box that can sustain loads up to 1000 lbs (450
kg) total.
SLIDE-IN CAMPERS
DO NOT
use slide-in campers on SRT-10 models.
EASY-OFF TAILGATE
Unlatch the tailgate and remove the support cables by
releasing the lock tang from the pivot, then rotate and
pull away from the box. Once the cables are free, move to
the right side of the tailgate hinge bracket.
Raise the right side of the tailgate until the right side
pivot clears the hanger bracket. Slide the entire tailgate to
the right to free the left side pivot. Remove the tailgate
from the vehicle entirely. Do not carry the tailgate loose in
the truck pickup box.
118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE