Dukane 8755G-RJ - Manual (Page 93)

Event Scheduling
Schedule Settings
Schedule settings can be configured from a web browser.
Example: If the IP address of the projector is set to 192.168.1.10:
There are three types of scheduling.
1) Daily: Perform the specified operation at a specified time every day.
2) Weekly (Sunday ~ Saturday): Perform the specified operation at the specified
time on a specified day of the week.
3) Specific date: Perform the specified operation on the specified date and time.
• In Standby mode the POWER indicator will flash green for approx. 3
seconds when at least “Power ON” schedule is saved.
• When the schedule function is used, the power cord must be connected to
the projector and the outlet and the power switch must be turned on, [ | ]. The
schedule function does not work when the power switch is turned off, [ ¡ ] or
the breaker in a room is tripped. The POWER indicator will lights orange or
green when the projector is receiving the power.
NOTE
) Enter "http://192.168.1.10/" into the address bar of the web browser.
2) Enter the Administrator ID and password and click [Logon].
3) Click [Schedule Settings] on the main menu and select the required schedule
item. For example, if you want to perform the command every Sunday, please
select the [Sunday].
4) Click the [Enable] check box to enable scheduling.
5) Enter the date (month/day) for specific date scheduling.
6) Click the [Apply] button to save the settings.
) Click [Add] to create new event. After configure the time, command and
parameters, click [Register] to add the new event. To return the previous
page, click [Cancel] button.
) Click the [Delete] button when you want to delete a schedule.