Delta TE-4000 User Manual
Delta Cassette Decks
Table of contents
Document Outline
- Quick Set Up Guide
- TE-4000/4500
- Shared Check Tracking
- Floating Clerk
- &
- Shared Kitchen Printing
- November 2003
- CHAPTER 1
- HARDWARE CONFIGURATION
- CHAPTER 2
- LOADING THE IPL
- CHAPTER 3
- INITIALISING THE TERMINAL
- CHAPTER 4
- MEMORY ALLOCATION
- File definition codes
- New Function Key
- This set up is designed for four terminals
- Make sure all terminals have the correct Terminal ID’s after
- Send In-Line connection table to all terminals
- Command code = 091
- To set up the in-line network you must install the I/O PB-17
- There are 2 types of In-line network selectable via a select
- Selector switch position 1 = Casio In-Line (ARCNET)
- Selector switch position 2 = Cat-5A Cable
- Initialise the first terminal and the machine number will be
- Example
- Record 1-91 Master Terminal = 1100
- Command code = 091
- CHAPTER 7
- SETTING UP SHARED CHECK TRACKING
- QUICK SET UP GUIDE 6
- Make sure files 15 and 60 are allocated in memory allocation
- 2622 100000
- 2622 100000
- Master recovery procedure to reconnect the network
- Note: MGR Mode is X position
- Use the procedure below to program the Table Clerk
- Turn the key to program
- Use the procedure below to program the table transfer key
- Turn the key to program
- CHAPTER 8
- SETTING UP FLOATING CLERK INTERRUPT
- Send In-Line connection table to all terminals
- Make sure all terminals have the correct Terminal ID’s after
- How to set up floating clerk Interrupt in detail
- How to set up shared printing in detail
- External printer 1
- External printer 2
- CHAPTER 10
- SETTING UP TIME & ATTENDENCE
- CHAPTER 11
- SETTING UP
- GRAPHIC LOGO’S
- Double click the new TE-4000 Logo & Watermark folder
- Go back to your CV-10 folder and double click on the icon be
- Click on the OK button on the user maintenance screen
- You should now see this screen
- Double click on the Graphic Logo Icon
- And proceed to the next page
- You should now see the two logo’s that you pasted to the log
- Set the file number on the software you wish to send down to
- CHAPTER 12
- CF CARD OPTIONS
- CHAPTER 13
- DALLAS KEYS
- CHAPTER 14
- ERROR CODES
- CHAPTER 10