beautypg.com

Operation – Ryobi P715 User Manual

Page 6

background image

6 — English

OPERATION

WARNINg:

Do not permit children to use spotlight. It is not a toy and
the temperature of the bulb will become hot after being
on for only a short period of time. This hot temperature
can cause serious burn injuries if touched and can melt
some fabrics.

WARNINg:

Do not allow familiarity with products to make you care-
less. Remember that a careless fraction of a second is
sufficient to inflict serious injury.

WARNINg:

Do not use any attachments or accessories not recom-
mended by the manufacturer of this product. The use of
attachments or accessories not recommended can result
in serious personal injury.

APPLIcATIONS

You may use this product for the purpose listed below:

To illuminate any areas requiring additional light

To illuminate distant objects

WARNINg:

The lens gets very hot during use. To reduce the risk of
burns, do not touch hot lens. To reduce the risk of fire,
keep away from combustible materials while in opera-
tion.

WARNINg:

Do not direct the light beam at persons or animals and
do not stare into the light beam yourself (not even from a
distance). Staring into the light beam may result in serious
injury or vision loss.

cAUTION:

Operate in a well ventilated area. Do not block vents.
Keep them clear to allow proper ventilation.

This product will accept Ryobi One+ 18 V lithium-ion battery
packs and Ryobi One+ 18 V nickel-cadmium battery packs.
For complete charging instructions, refer to the Operator’s
Manual for the battery packs and chargers listed in the
General Safety Rules.

bATTERy PROTEcTION fEATURES

Ryobi lithium-ion batteries are designed with features that
protect the lithium-ion cells and maximize battery life.

TO INSTALL bATTERy PAcK

See Figures 1 and 3, page 8.

Place the switch trigger in the

Off position.

Place the battery pack in the spotlight.

Make sure the latches on each side of the battery pack

snap in place and that battery pack is secured in the
spotlight before beginning operation.

TO REMOvE bATTERy PAcK

See Figures 1 and 3, page 8.
 Place the switch trigger in the

Off position.

Locate latches on side of battery pack and depress both

sides to release battery pack.

 Remove battery pack from the spotlight.