Ryobi ES1500 - Manual (Page 5)

5 – English
App images may vary.
OPERATION
To use the device as a transfer level:
See Figures 3 - 4.

Press “level” on the mode selector.
 To obtain a flat level, place your smartphone on the surface
you want to reference and tilt it until the leveling circles
are aligned.
 To obtain a horizontal level, hold your smartphone upright
or sideways and tilt it until the reference angle is at 0 °.
NOTE: Depending on your device’s settings, the laser beam
may turn on or blink when level is achieved.
Global Settings/Settings
See Figure 5.

Tap the Settings icon on the RYOBI
™
Phone Works ™ home
screen to make changes based on your preferences.
 Settings specific to some app segments can only be
changed within the app segment.
 Tap Save to apply changes.
 You may also LOGOUT from this screen, view the Terms
and Conditions, and view the Privacy Policy.
Fig. 3
Fig. 4
Fig. 5
Mode Selector
Leveling Circle
Settings Icon
Reference level line
0°
Reference Angle