Ryobi ES1500 - Manual

1 – English
IMPORTANT SAFETY INSTRUCTIONS
ES1500 LASER POINTER/TRANSFER LEVEL
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS. Failure
to follow all instructions listed below, may result in electric
shock, fire and/or serious personal injury.
WARNING:
Changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user’s
authority to operate the equipment.
WARNING:
Use of controls, adjustments, or performance of procedures
other than those specified here can result in hazardous
radiation exposure.
 Read operator’s manual carefully. Learn the applications
and limitations, as well as the specific potential hazards,
related to this device. Following this rule will reduce the risk
of electric shock, fire, or serious injury.
 Do not disassemble the device. Contact with internal parts
may increase the risk of electric shock or cause damage to
the device.
Aperture
7
Thank you for purchasing RYOBI
™
Phone Works ™
If you need assistance
DO NOT RETURN TO THE STORE
Please contact us at 1-877-578-6736
This app is optimized for: iOS versions 6.0 and higher ∙ Android versions 4.0 and higher
For a full list of compatible phones please visit www.ryobitools.com/phoneworks
 Do not use on a ladder or unstable support. Stable foot-
ing on a solid surface enables better control of the device in
unexpected situations.
 Do not store the device in an area of high heat or humid-
ity. Do not expose the device to extended high heat from
the sun (such as on a vehicle dashboard.) To reduce the
risk of serious personal injury, do not store outside or in
vehicles. Damage to the device or the battery can result.
 Do not expose device to rain or wet conditions. Water
entering a device will increase the risk of electric shock.
 Use the device in accordance with these instructions
and in the manner intended for the device, taking into
account the environmental conditions and the work to be
performed. Use of the device for operations different from
those intended could result in a hazardous situation.
 The laser used in this product is Class IIIa (3R) with < 5mW
and 630-670nm wavelengths.
 Avoid direct eye exposure when using the laser and do
not project the laser beam directly into the eyes of others.
Serious eye injury could result.
 Do not place the instrument in a position that may cause
anyone to stare into the laser beam intentionally or
unintention ally. Serious eye injury could result.
 Do not operate the laser product around children or allow
children to operate the tool. Serious eye injury could result.
 Always turn the laser product off when not in use. Leaving
the tool on increases the risk of someone inadvertently staring
into the laser beam.
 Do not operate the instrument in com bustible areas such
as in the presence of flammable liquids, gasses, or dust.
 Always ensure the laser beam is aimed at a surface
without reflective proper ties. Shiny reflective materials are
not suitable for laser use.
 The laser beam shall be used and maintained in
accordance with the manufacturer’s instructions.
 Never aim the laser beam at a person or object other than
the target surface.
 Handle the instrument with care. Treat it as you would any
other optical device such as a camera or binoculars.
 Avoid exposing the instrument to shock, continuous
vibration, or extreme hot or cold temperatures. Damage
to the product and/or serious injury to the user could result.
TM
TM
990000988
(Rev:01) 10-3-14