Dixon SpeedZTR 539 131354 - Manual (Page 7)

7
NOTE: When right hand (R.H.) and left hand (L.H.) are mentioned in this manual, it means when
you are seated on the mower in the operator’s position.
CAUTION
BEFORE ASSEMBLING GRASS CATCHER TO MOWER:
• Set parking brake.
• Place motion control levers in “NEUTRAL” position.
• Turn ignition key “OFF” and remove key.
• Make sure the blades and all moving parts have completely stopped.
• Disconnect spark plug and place wire where it cannot come in contact
with plug.
UNPACKING INSTRUCTIONS
• Remove all parts and packing materials from
both cartons.
• Check carton contents against list. Be sure all
parts are there.
CARTON 1 CONTENTS
1 - Lower Chute 1 - Owner’s Manual
1 - Hose 1 - Hanger Bracket
2 - Hi-Lift Blades 1 - Catcher Support
1 - Deflector Bracket 1 - Weight Kit
2 - Support Straps 1 - Bag of Hardware
CARTON 2 CONTENTS
1 - Cover Assembly 2 - Soft Bag Containers
1 - Bag of Hardware
PARTS IDENTIFICATION
Cover
Assembly
Grass Catcher
Containers
Flex Hose
Lower Chute