Dixon SpeedZTR 539 131354 - Manual (Page 10)

10
5 LOWER CHUTE
ASSEMBLY
1. Attach the chute latches on both sides of the
lower chute as shown.
2. Slide the bracket extension into the slot on the
lower chute. Pull latches down and attach
hooks into the holes on deck tabs.
Latch Assembly
Deck Tab
1. Slide flex hose onto open end of the lower
chute.
2. Thread hose clamp around flex hose and
chute. Pull tight.
3. Push opposite end of the flex hose through
gasketed hole in grass catcher cover. Bend
flex hose end downwards towards grass
catcher containers.
Note: The length of the hose may be cut for
best fit.
6 FLEX HOSE
Lower Chute
Chute Latch
Cover Gasket
Bend Hose downwards
towards bags
Deck Tab