Wisdom Audio Series SW-1 User Manual
Page 13
13
mark both plug and outlet to ensure that all products remain in the proper
orientation should it become necessary to temporarily disconnect the
system (as for example, during an electrical storm).
Finally, the Wisdom Audio SW-1 incorporates a fuse block that protects
both the live and neutral (ground) sides of the circuit. If your SW-1 is
plugged into an AC outlet that you know is live (plug a lamp into it as a
test), and yet appears to be off, check the following:
1
Check the AC cord to make sure it is not damaged.
2.
Check the AC mains switch to ensure that it is On (the side
with the straight line is depressed, not the “O” side).
3.
If that does not resolve the problem, turn Off the AC mains
switch (“O”) and then disconnect the power cord from the AC
mains receptacle.
4.
Using a small screwdriver, gently pry open the fuse block cover
at the top edge of the assembly. (You may be able to do it with
just your fingernail.)
5.
Pull out the fuse block, and check both fuses. If either is blown,
please contact your local Wisdom Audio dealer (or Wisdom
Audio) for service.