Dynex DX-IPDR - Manual

iPod® Docking Station with Remote
Station d’accueil iPod® avec télécommande
Estación de Acoplamiento iPod® con Control
Remoto
DX-IPDR
USER GUIDE
GUIDE DE L’UTILISATEUR I GUÍA DEL USUARIO
Box Contents
• Docking station
• AC power adapter
• AV cable (5 feet)
• Sync cable (6 feet)
• S-Video cable (6 feet)
• Universal dock adapter (8)
• Remote control
Setting Up
Connecting your iPod to the docking station
1 Connect the universal
dock adapter
appropriate for your
iPod to the docking
station.
For… Use this adapter…
iPod Mini (4 GB/6 GB) 3
iPod (20 GB/U2 Special Edition) 4
iPod (40 GB) 5
iPod with color display (20 GB/30
GB/U2 Special Edition) 6
iPod with color display (40 GB/60 GB) 7
iPod Nano 8
iPod Video (30 GB) 9
iPod Video (60 GB) 10
2 Place your iPod in the docking station.
3 Remove the plastic tab on the remote control before
using the fi rst time.
Connecting to a TV using the S-Video or A/V
cable
1 To connect S-Video,
plug the S-Video
cable into the docking
station and your TV.
2 To connect standard
video, connect the A/V
cable into the docking
station’s 3.5mm
auxiliary jack, then
connect the yellow
RCA plug to your TV’s
yellow Video In jack.
Connecting to an external audio device
1 To connect external
audio, connect the
A/V cable into the
docking station’s
3.5mm auxiliary jack,
then connect the red
and white RCA plugs to
your audio device’s red
and white Audio In jacks.
Connecting power using the USB sync cable
1 Plug the AC power
adapter into an AC
power outlet.
2 Plug the USB sync
cable into the USB
port on the AC power
adapter and the 30-pin
connector on the back of your docking station.
3 You may control your iPod charging mode using the
ON/OFF switch located on the side of your docking
station.
A/V cable S-Video cable
A/V cable S-Video cable
DX-IPDR.indd 1 DX-IPDR.indd 1 4/22/2006 11:43:02 AM 4/22/2006 11:43:02 AM