Weston Roma Traditional Style Pasta Machine - Manual (Page 5)

-5- -16-
5. Align the notches on the Handle
with the notches in the Drive Slot
of choice. Slide the Handle into the
Drive Slot of the Roller or the Cutter
Attachment to be used (Figure D).
NOTE: Be sure to notice when the
Handle turns, it passes below the
edge of the work surface and turns
freely, it should not hit the work
surface. If the Handle comes in
contact with the work surface, loosen
the C-Clamp and reposition the
Pasta Machine to allow more space
(Figure E).
Figure D
Spaghetti
Cutter Drive
Slot
Fettuccini
Cutter Drive
Slot
Roller
Drive Slot
Handle
Figure E
NOTE: The Pasta Machine and the Cutter Attachment may have some
excess oil on it from the factory. This is to protect the machine during shipping.
THIS OIL MUST BE REMOVED BEFORE USING THE MACHINE! Follow
the “Cleaning Instructions” to clean the Pasta Machine prior use.
The Pasta Machine and the Cutter Attachment may have some excess oil on it from the
factory. This is to protect the machine during shipping. THIS OIL MUST BE REMOVED
BEFORE USING THE MACHINE!
. Using a clean dry cloth, wipe all the surfaces clean. DO NOT USE WATER! Never
wash the Pasta Machine or the Cutter Attachment with water, place it in water, or put
it into the dishwasher. Simply wipe it clean with a dry cloth.
. To clean the inner surfaces of the Pasta Machine and the Cutter Attachment
pass a piece of dough through the Rollers and Cutters several times, making sure the
dough touches all the surfaces, especially the sides where machine oil can accumulate.
Discard this dough when finished.
. Use a dry pastry brush to remove any flour or bits of dough from the hard to reach
places.
. Lightly sprinkle some flour on the Rollers and Cutters. Using a dry brush, work the
flour into the edges of the Pasta Machine and into the Cutter Attachment. Brush all the
flour away and wipe the machine clean again with a clean, dry cloth.
. NEVER INSERT KNIVES BETWEEN THE ROLLERS OR THE CUTTERS!
CLEANING