Waldorf Streichfett - Manual (Page 14)

The Streichfett Controls
Streichfett Reference Manual 14
Octaves Selector
This is the octave setting for the Strings. Three positions
are available:
• 8 va : One octave higher than Base octave.
• Both : Base octave mixed with the 8 va octave.
• Base : The normal octave setting.
Crescendo
This is the attack rate for the Strings envelope.
Release
The release rate for the Strings envelope. Sustain is always
at 100%, so there is no need for a decay setting.
Ensemble Switch
Switches the Ensemble effect for Strings on or off. This
effect adds more depth and width to the sound. We re-
commend to always activate it for strings and choir
sounds.
The ensemble effect is an advanced chorus effect which
consists of three delay lines with different modulation
speeds and phase shiftings.
Ensemble Selector
Three modes for the Ensemble effect can be selected here:
• String (left position): the classic string machine en-
semble effect.
• String + Chorus (middle position): Combination of
string and chorus for maximum depth and width of
the sound.
• Chorus (right position): The classic chorus effect.
Balance
Mixes the signals of the Strings and Solo section. The
leftmost position selects Strings only, while on the far right
only the Solo section is audible. In the middle position,
both Strings and Solo are mixed with full scale.