Volant Ram - Manual (Page 4)

Closed Box Air Intake System
13-15 Dodge Ram 5.7L
PN 16457/164576
1/21/2015
INS16457 Volant Performance · 140 Blaze Industrial Pkwy · Berea, OH 44017 · P: (909) 481.3888 · F: (440) 891-1868
4
E-Mail: [email protected] www.volant.com
17. Press the Volant duct into the hump hose and sleeve and tighten the remaining clamps. (Fig Q)
18. Attach the breather hose to the Volant ¾ in elbow. (Fig R)
19. Connect the ATS harness to the sensor. (Fig S)
20. Attach the Pro5 Filter #5144 or PowerCore® Filter #61503 to the Volant box. (Fig T)
21. Attach the Volant air box lid to the Volant box using the provided hardware. (Fig U)
22. Reconnect the negative battery cable and check all connections before driving, retighten all connections after
500 miles. (Fig V)
*Check that this air intake complies with your Federal, State and Local laws. We recommend saving your stock system.
BEFORE ROAD TESTING
1. Start engine, leaving the transmission in park and securing the parking brake.
2. Make sure to look and listen for any unusual noises or air leaks. Repair problems if needed.
3. Once completed it will be necessary to check periodically, after a few heat cycles, for realignment and
tightening of all connections.
CARE AND CLEANING
Check the Pro-5 cotton reusable filter periodically and remove any excessive dirt build-up by tapping the filter
on the ground and brushing off the loosened dirt. Clean the filter by using a two stage cleaning kit to
thoroughly clean and re-oil the filter. Re-oil every 10,000 miles without cleaning to improve filtering in sand
and dirt. Clean only when dirt is very excessive or 20,000 miles.
FOR REPLACEMENT FILTERS REFERENCE PRO5 #5144 or POWERCORE® #61503 & CALL 440-891-0999
OR TOLL FREE 1-800-486-0999
PICTURES ON NEXT PAGE