Vermona Retroverb Lancet - spring reverb - Manual (Page 19)

Further Control Elements
OVERKILL
Connects Retroverb Lancet to the AC-power-supply-unit. A green LED
shows an active powered unit.
ATTENTION The OVERKILL switch is no power switch. It simply
removes the connection to the power supply. Please do
always disconnect the PSU from the socket when not
using the unit for a longer period!
REV. LEVEL
This controller allows to adjust the reverb level. Turning it counterclock-
wise will decrease the reverb signal while turning clockwise amplifies the
signal.
The reverb level is already set to a useful value and readjusting won't be
necessary in most cases.
Owner's Manual VERMONA Retroverb Lancet
- 19 -