Velodyne VX-10 - Manual (Page 15)

14
☞
The following conditions require service by a qualified technician:
1. The power cord has become damaged.
2. The unit does not appear to operate normally or exhibits a marked
change in performance.
3. The unit has been exposed to water.
4. Some part of the cabinet or circuitry is physically damaged.
SPECIFICATIONS VX-10
Cabinet Design Bass-reflex with built-in power amplifier
Frequency response 36Hz - 120Hz (+/- 3dB)
Crossover frequency 50-200Hz (variable)
Maximum output power 150 Watt (dynamic)
Phase 0° or 180°
Input impedance 1.2K ohm
(for SPEAKER LEVEL INPUT terminals)
65K ohm
(for LINE INPUT jacks)
Sensitivity
Speaker-Level
1.6V
Line 230mV
Speaker 10" (8.5" piston diameter)
Power Supply 120V 60Hz AC
Power consumption 75 Watt
Cabinet (H,W,D) 15" x 12" x 17"
381mm x 304.8mm x 431.8mm
Weight (approx.) 35 lbs.
Specifications are subject to change without notice.
Thank you for purchasing a
Velodyne VX-10 Subwoofer!