Velodyne SubContractor Series - Manual (Page 19)

www.velodyne.com SC-1250 Amplifier User’s Manual - 13
listening position. Select the switch position at which you hear the most bass. The led will show the
phase selected by showing “PH” followed by the phase number.
• LIGhT — If you wish, you can deactivate the numeric led on your SC-1250. To do this, press the LIGHT
button on your remote. To reactivate the LED, press the LIGHT button again.
• NIGhT — night mode limits the maximum dynamic output of the subwoofer for late night listening or to
be more considerate of close neighbors. Press the night button to turn the night mode feature on or off.
Activation of night mode causes “n” to appear briefly on the display. When night mode is deactivated,
the display shows “n off” and then returns to normal function.
• VOLUME CONTROL — This control allows you to balance the output from the subwoofer to the main
speakers in your system. This control should be set to achieve similar volume level from between both
the main speakers and subwoofer. When pressing volume up or down, the volume level is shown on the
numeric led on the front panel.
Note: The volume can also be adjusted via the volume buttons on the front panel of the amplifier. These
buttons have the same effect as pressing the up and down volume buttons on your remote.
• pRESETS — There are 4 presets, consisting of Movies, R&B – Rock, Jazz – Classical, and Games. As
a preset is chosen, the preset is shown on the numeric led as P1 for preset 1, P2 for preset 2, etc. The
presets provide the following characteristics for bass reproduction:
movies: maximum output and impact for explosions and other action adventure movie
content.
R&B – Rock: Provides the driving bass found in today’s rock music.
Jazz – Classical: The tightest, cleanest, lowest distortion bass. The flattest frequency response of the
four presets.
Games: maximum loudness available for the impact of video games.