Velodyne SPL-800i - Manual (Page 13)

www.velodyne.com SPL-800i User’s Manual - 7
SPEAkER-LEVEL CONNECTION - OPTION C
Figure 3 shows an easy way to connect your Velodyne subwoofer directly to your receiver or integrated amplifier,
if it lacks line-level outputs. You may also connect your satellites directly to your receiver or amplifier along with
the subwoofer. Your receiver or amplifier will not notice the additional load of the subwoofer due to the high
input impedance.
Caution!!! To avoid damage to your main amplifier, be sure to maintain correct polarity when making all
connections. Red (positive) to red, and black (negative) to black. Be sure that all connections are tight, and that
there are no loose strands or frayed wires.
Figure 3: Installation using speaker-level inputs