Velodyne Impact Series - Manual (Page 11)

www.velodyne.com Impaact Series User’s Manual - 5
REAR PANEL CONNECTIONS
Figure 1.Impact Rear Panel Connections
Figure 1 shows the connections on the rear panel of the Impact. Following are brief descriptions of the
connections described in Figure 1. More detail of these connections can be found below:
(1) LINE INPUT jacks - Connect these jacks to the LINE OUT jacks of the amplifier.
(2) SPEAKER LEVEL OUTPUT terminals - The speaker-level signal to the front speakers is output from
these terminals.
(3) SPEAKER LEVEL INPUT terminals - connect these input terminals to thecspeaker output terminals of
your amplifier or receiver.
(4) PHASE switch - Select the switch position at which you hear a loudermid-bass sound.
1
2 3 4
5
6
7