VDO WL X1 DW User Manual

Page 19

X1DW

VDO CYCLECOMPUTING

www.vdocyclecomputing.com

X1DW

5.6 Service interval display

BIKE SERVICE/ON (switch to OFF
using ). Confirm with

BIKE SERVICE/BIKE 1
(use to switch to bike 2)
Confirm with

BIKE 1 ...SET DISTANCE/
CONTINUE. You can set the flash-
ing digits using To access
the next digit, confirm with

Repeat the steps until the last digit on the right
is flashing. Confirm with

BIKE 1/SET OK? Confirm with

The display confirms: BIKE SERVICE/SET DONE.
Automatic return to SETTINGS/SELECT.

The VDO service interval display reminds you to
have your bike checked in the workshop.
You can switch the service interval ON or OFF.
You can set separate service intervals for 2 bikes
When the set service interval distance has been
reached:

The -symbol flashes on the display.

The information line displays

BIKE SERVICE/BIKE 1
You should now either carry out the recommend-
ed bike check yourself or have the bike checked
by your dealer.
Press any button. The text BIKE SERVICE disap-
pears again. After another 50 km the -also dis-
appears. You can also switch off the flashing
symbol. To do so, enter the service interval again.

How to set the service interval:

Using go to SETTINGS/
SELECT. Confirm with

You are now in setting mode
(pressing

for 3 seconds gets

you back to function mode).

Using go to BIKE SERVICE/
SET. Confirm with

In Sleep-Modus 2 the wireless receiver is also
switched off. (after 15 min).

The display shows SLEEP
MODE/PRESS BUTTON
Before continuing to ride,
you must press a button to
switch the receiver back on.

The display for the speed and
the cadence flashes.

The computer now waits for speed and cadence
signals (as long as cadence is installed). Simply set
off riding now. The computer acquires the digital
encodings from the transmitter.

5.7 Sleep mode

Your VDO computer is equipped with a two-fold
sleep mode function.
In sleep mode, a large part of the display is switched
off to save battery power. Time and service
interval display continue to be displayed.

Sleep mode 1 switches itself on after 5 minutes if
no speed impulses are processed and no button
is pressed.
Sleep mode 1 is ended when speed impulses
are processed again (when cycling) or a button
is pressed.