Ubiquiti Networks NanoBridgM - Manual (Page 6)

*720-00064-01*
720-00064-01
NBM900 LEDs
Power The Power LED will light green when
the device is connected to a power source.
Ethernet The Ethernet LED will light steady
green when an active Ethernet connection is
made and flash when there is activity.
Signal In airOS, you can modify the wireless
signal strength threshold values for each
LED on the Advanced tab under Signal LED
Thresholds. The default values are shown below:
LED will light red when the wireless
signal strength is above -94 dBm.
LED will light amber when the wireless
signal strength is above -80 dBm.
LED will light green when the wireless
signal strength is above -73 dBm.
LED will light green when the wireless
signal strength is above -65 dBm.