Tube Tech SMC 2BM Multiband Mastering Opto Compressor User Manual
Page 6
Lydkraft ApS
Mose Allé 20, DK2610 Rødovre
Denmark
6
5) The difference between channels shall be within 0,5dB
6) Repeat step 2-5 for the two other bands
OUTPUT GAIN potentiometer:
1) Turn the OUTPUT GAIN on max. gain (clockwise) and check that the difference
between the two channels, are less than 0,1dB.
2)
Set
t
he
gai
n
pot
t
o
“
0”
dB.
3) The potmeter in the channel with the lowest level is adjusted to match the other
channel, by changing the resistor, until the level is within 0,1dB.
The resistance range is normally within 274K
to 510K
4) The difference between channels shall be within 0,5dB
(010502)