Tube Tech CL 2A Dual Opto Compressor - Manual (Page 3)

LYDKRAFT ApS
Mose Allé 20, DK 2610 Rødovre
Denmark
3
NB:
Leave the meter switch in position compression as it might
introduce distortion if left in output position.
IN/OUT:
Switches the compressor in and out of the signal path.
In the out position the entire compressor is bypassed.
ATTACK: The attack control chooses how fast/slow the compressor responds to
an increase in the input signal.
The attack control is continuously variable from 1 to 60 milliseconds.
RELEASE:
The release control chooses how fast/slow the compressor responds to a
decrease in the input signal.
The release control is continuously variable from 0,06 to 2 seconds.
ATTACK/RELEASE SELECT:
This switch selects how the compressor reacts to a increase (attack) or
decrease (release) of the input signal.
There are two settings of the switch:
1. Fixed.
Attack time: 3 mS
Release time: 60 mS
2. Manual.
Attack time: from 1 mS to 60 mS
Release time: from 0.06 S to 2 S
LINK:
Interconnects several compressors on link 1 or link 2.
If the compressor is left in the off position, it works entirely
independently.
(981214)