Tube Tech EQ 1AM Parametric Mastering Equalizer User Manual
Page 6
LYDKRAFT ApS
Mose Allé 20, DK 2610 Rødovre
Denmark
6
SPECIFICATIONS:
EQ 1A, EQ 1AM
Gain:
0dB
Input impedance:
> 600
Output impedance:
< 60
Distortion (THD+n @ 40 Hz):
0 dBU:
< 0,10 %
10 dBU:
< 0,15 %
max output (1% THD+n):
> +26 dBU
Noise (Rg=200
):
22Hz-22kHz:
< -85 dBU
CCIR-468-4:
< -75 dBU
Frequency response (-3dB):
5 Hz - 80 kHz
CMRR (@ 10kHz):
< -60dB
FILTERS:
Low cut:
16, 25, 40, 60, 90, 130Hz
Slope:
6dB or 12dB/octave
Low shelving:
22, 32, 45, 70, 100, 150Hz
Gain:
+/- 15dB
Band 1:
40, 50, 63, 80, 100, 125, 160, 200, 250, 315, 400, 500Hz,
Band 2:
0.315, 0.40, 0.50, 0.63, 0.80, 1.0, 1.25, 1.6, 2.0, 2.5, 3.15kHz
Band 3:
1.6, 2.0, 2.5, 3.15, 4.0, 5.0, 6.3, 8.0, 10, 12, 16, 20kHz
Gain:
+/- 20dB (BW= sharp).
(band 1-3)
+/- 12dB (BW= broad).
High shelving:
4.0, 6.0, 8.0, 12, 18, 26kHz
Gain:
+/-15dB
High cut:
6.3, 8.0, 10, 12, 18, 25kHz
Slope:
6dB or 12dB/octave
Tubes:
3x ECC81, 1x ECC82, 3x ECC83
Dimensions:
H: 2 units, W: 19", D: 205 mm
Weight:
5,5kg
Power requirements:
115V/230V, 50-60Hz, 35W
All specifications at RL=600
Lydkraft reserves the right to alter specifications without prior notice