Tube Tech EQ 1AM Parametric Mastering Equalizer User Manual
Page 3
LYDKRAFT ApS
Mose Allé 20, DK 2610 Rødovre
Denmark
3
HIGH SHELVING:
GAIN:
EQ 1A:
The gain control is continuously variable from 0 dB to 15 dB.
EQ 1AM: The gain control has 12 steps and is variable from 0 dB to 15 dB.
Steps: 0, 1, 2, 3, 4, 5, 6, 7, 9, 11, 13, 15 dB
FREQUENCY: There are a choice of six frequencies: 4, 6, 8, 12, 18, 26 kHz.
The frequency where the boost or cut is 12 dB when the gain is at max.
BOOST/CUT:
Determines whether the gain control shall be boosting or cutting.
IN/OUT:
Switches the frequency dependent network in and out.
HIGH CUT:
The low cut section includes a frequency switch, an slope switch and an
in/out switch.
FREQUENCY: The -3 dB point at which the frequency response starts to decline.
There are a choice of six frequencies: 6.3, 8, 10, 12, 18, 25 kHz.
SLOPE:
The slope can be switched between either 6 dB/oct. or 12 dB/oct.
IN/OUT:
Switches the frequency dependent network in and out.
BYPASS:
This switch bypasses the whole unit by a click less relay.
This means that in case of power failures, the input is connected to the
output.
(
030507)