TFC Group Talento 894 - Manual (Page 31)

13. Read – Change – Delete – Reset 32
13.2 Change
Every program contents can be changed/overwritten individually.
With the Prog. key (read), call up the contents which you want to
change/overwrite.
Changing is performed in the same way as entering new data
(see the relevant Section).
• Switching commands, see Section 8
• Date, see Section 9
– Single date without/with year, see Section 9.1
– Date range without/with year, see Section 9.2
• Priority, see Section 10
• Pulse switching commands, see Section 11
• Cycle switching commands, see Section 12
13.3 Delete – Individual switching commands
With the Prog. key (Read – see Section 13.1) call up the contents
which you want to delete.
In the case of combined switching commands, with a single date,
with a date range, with pulse or cycle, only the part which can
be read in the display is deleted.
Press the Clear key 1x. These contents are deleted.