TFC Group Talento 894 - Manual (Page 28)

29
Setting the cycle time from 01 ... 99
Press the key step-wise
Note: If the key is pressed
for longer, adjustment
takes place in increments
of 05.
Setting the ON switching duration,
01 ... 99
This can never be greater than the
previsously set cycle time.
Press the key step-wise.
Press the Prog. key 1x only briefly.
The switching command is saved.
A free memory location is displayed
– for additional inputs.
or
Press the key 1x.
The input is completed.
The display shows the
date and the time.
GB