TFC Group Talento 892 Plus - Manual (Page 21)

19.00 h 9.00 h
64
Duration
Pause
Duration of the cycle
Channel ON Channel OFF
Period
Start time
Stop
time
C Cycle programming
The cycle duration must not be less than
the period
No nesting of cycle programs is allowed
A cycle switching command consists of:
• Start time
• Duration = ON switching duration
• Period = ON switching duration + pause
• Cycle duration = time between channel
ON and channel OFF
• Stop time
Example:
Channel 1 is switched on every 30 minutes for 10
minutes, starting on Monday 9 00 am
The stop time is Friday 7 00 pm
Start time Monday
09 00 am
Duration 10 min
Period 30 min
Stop time Friday 07 00 pm