Test Products International 293 - Manual (Page 26)

27 26
F. MAINTENANCE
1. Battery Replacement: The 293 will display a bat-
tery symbol when the internal 9 Volt battery needs
replacement. The battery is replaced as follows:
a. Disconnect and remove all test leads
from live circuits and from the 293.
b. Loosen the screw from the back of the
293 battery cover.
c. Remove the battery compartment cover.
d. Remove old battery and replace with new battery,
observing the correct polarity.
e. Reassemble the instrument in reverse
order from above.
2. Cleaning your 293:
Use a mild detergent and slightly damp cloth to
clean the surfaces of the 293.
k. Disable Sleep Mode
1. Set the 293 to the OFF position.
2. Push and hold down the HOLD button while
turning the rotary switch to the desired function.
3. Release the HOLD button.
4. Check the LCD to see if the HOLD function is
activated. If “H” is on the display, push the HOLD
button to deactivate the DATA HOLD mode.
5. Sleep mode is now deactivated.
Standard Accessories Part No.
9 Volt Alkaline Battery A009A
Test Lead Set A040
Soft Carrying Pouch A200
Optional Accessories Part No.
Deluxe Test Lead Set SDK1C
IEC 1010 Deluxe Test Lead Kit TLS2000BC
Hard Carrying Case A201
*These accessories have not been evaluated by UL and are not
considered as part of the UL Listing of this product.
E. ACCESSORIES*