Taser X2 - Manual (Page 6)

Step 4: Set the Sighting Options
You can set up your X2 CEW to turn the LED flashlight and LASER sights off or on, in several
configurations.
To set the sighting options, follow these steps:
1 Ensure that the safety switch is in the down (SAFE) position.
2 Press and hold the selector switch ( ) until the main menu displays.
3 Press the left ARC ( ) switch to display the sighting options.
4 Press the right ARC ( ) switch to select the needed setting.
OO – Flashlight OFF and LASER OFF
LO – LASER ON and flashlight OFF
OF – LASER OFF and flashlight ON
LF – LASER ON and flashlight ON
5 Press the selector switch to return to the main menu.
You can set the other options. If you are done configuring the X2 CEW, press the
selector switch again to exit.