Taser X2 - Manual (Page 10)

Step 7: Trigger Switch
Unlike a firearm trigger, the X2 trigger switch is a momentary electrical switch. The trigger is
operational only when the safety switch is in the up (ARMED) position. Pulling and releasing
the trigger switch will deploy the first selected cartridge and result in an approximately
5-second discharge unless the safety is shifted to the down (SAFE) position. Unless your CEW
is equipped with the Automatic shut-down Performance Power Magazine (APPM)*, pulling
and holding the trigger switch for more than 5 seconds will result in a continuous discharge
until the trigger switch is released or the battery is depleted—whichever happens first.
Multiple trigger pulls will have different effects, depending on the assigned deployment
mode: Semi-Automatic Mode or Manual Mode. See the TASER X2 CEW User Manual for more
information on the operating modes.
Trigger Switch
*See the TASER X2 CEW User Manual for more information on the APPM.