Dynex DX-E202 - Manual (Page 3)

10/100Mb CardBus Network Card 3
Important safety instructions
Before getting started, read these instructions and save them for later reference.
• Before you install your CardBus network card into your computer, read this user guide.
In some operating systems, the driver must be installed before you install your card.
• Do not drop or hit your network card.
• Do not install your network card in a location that is subject to strong vibrations
because vibration may damage your card.
• Do not disassemble or try to modify your network card.
• Disassembly or modification may void your warranty and could damage your network
card leading to a fire or electric shock.
• Do not store your network card in a damp location. Do not allow moisture or liquids to
drip into your card. Liquids can damage your card leading to a fire or electric shock.
• Do not insert metal objects, such as coins or paper clips, into your network card.
• Your network card is for general computer use. Do not use your card in a computer that
requires exceptional reliability, especially if a breakdown or malfunction of your card
might jeopardize life or health, such as aerospace equipment, atomic power control
systems, traffic-related equipment, transportation equipment, industrial robotics,
combustion equipment, safety devices, and life-support systems.
Features
• Compliance with the IEEE802.3 (10 Base-T) and IEEE802.3u Fast Ethernet (100
Base-TX) specifications
• Support for full-duplex flow control (IEEE 802.3x) for improved performance
• Support for auto-negotiation, which automatically selects IRQ and I/O addresses
• Compliance with the PC Card type II and 32-bit CardBus standards
• PC Card (68-pin) and Network (RJ-45) connectors
• Hot-swappable, Plug-and-Play operation (you can insert or remove the card without
turning off your computer.)
• One LED to indicate network link and activity (the LED is ON when a link is established
and flashes when data is being transferred.)
• One LED to indicate duplex operation (the LED is ON when the card is operating in full
duplex.)
Package contents
Make sure that the package contains the following items:
• DX-E202 10/100Mb Cardbus Network Card
• CD containing drivers and install guide
• This installation guide
Dynex-A5-ENG.fm Page 3 Wednesday, October 21, 2009 10:04 AM