SurgeX CM-1115-RT-AR - Manual (Page 2)

CM-1115(20)-RT-AR Quick Start Guide Page 2
Changing the IP Address
1. Device Management Utility (DMU). Obtain the
latest DMU from the SurgeX website at
http://www.surgex.com . The DMU provides
the easiest means to find and configure your
CM-X-AR for use. It can discover all CM-X-ARs
on the local network, display the current IP
address of each, and allow the setting of any
valid IP address.
The DMU can also be used to return a CM-X-AR
to its factory default condition. This may be used to recover a CM-X-AR with a lost password.
Highlight a unit in the list and choose menu item Set | Factory Defaults.
Note: Setting the IP address or performing a reset to Factory Defaults can only be performed
within the first 2 minutes of powering up the CM-X-AR. The DMU will only work with units on
the same local subnet as the PC.
2. Web Page Setup - Manual. From the home page,
click Setup, and then Network. Enter the new IP
Address, Subnet Mask, and Gateway, and then
click Save. Click the Reboot button (or press the
reset button next to the Axess On LED) to restart
the CM-X-AR with the new settings.
3. Web Page Setup - DHCP. From the home page,
click Setup, and then Network. Change the IP
mode from Static to DHCP. Click Save, and then
Reboot. The CM-X-AR will automatically obtain its
network settings from the DHCP server. Check the server IP/MAC table or use the DMU to
obtain the new settings.