Directed Electronics 1.3X - Manual (Page 28)

20 © 2011 Directed Electronics. All rights reserved.
UnLocking without the honk (Silent Unlock)
Press the button on the remote one-time, and then press the
1
3
4
5
6
2
A U X
button. The
vehicle unlocks without the confirmation honk. The parking lights flash two-
times. The 2- way remote flashes the
1
3
4
5
6
2
A U X
LED to confirm unlocking. If no unlock
confirmation is received, the 2- way remote emits the out-of-range signal.
When unlocking in valet mode with the 2- way remote, the remote generates
two error tones and the
1
3
4
5
6
2
A U X
and LEDs light up.
➢
Valet mode
You can prevent your system from automatically activating the Failsafe® Starter
Kill. When the system is in Valet mode, the feature is disabled. The doors
do not automatically lock. This is useful when washing or having the vehicle
serviced.
To enter or exit valet mode with the Control button:
1. Turn the ignition key on and then off.
2. At anytime during the next 10 seconds, press and
release the Control button on the Control Center.
The LED turns on solid when you enter Valet®
Mode, and turns off when you exit Valet Mode.
To enter or exit Valet mode with the remote control:
Press two times, and then to set the system in Valet Mode. Repeat the
process to take the system out of Valet Mode.
The Control Center LED turns on solid when in Valet Mode and turns off when
exiting Valet Mode.