StorCase Technology 14-Bay 3U Fibre - Manual (Page 14)

Introduction 5
InfoStation 14-Bay FC User's Guide - Rev. A00 StorCase Technology, Inc.
Rear Panel
(Figure 3)
WARNING: DO NOT USE MODULE HANDLES TO LIFT CHASSIS! These handles are
specifically designed for the installation and removal of modules only!
NOTE: Blank plate (provided) must be installed if any module slot is left empty. Instal-
lation of the blank plate is necessary for proper cooling inside chassis.
• Port Bypass Module "A" (Figure 4) - InfoStation comes equipped with one (1) Port
Bypass (PBP) Module, for dual FC loop configurability.
• Port Bypass Module "B" Option - Allows the installation of an optional PBP Module,
for quad loop configurability. Refer to Appendix B for further information.
• Power Supply Modules - Two (2) 460W redundant, hot swappable power supply
modules. Each module features overvoltage and overcurrent protection, total usage
hours, and power supply fault detection.
Module LED(s) -
Green LED - Steady glow indicates normal power supply operation.
No glow indicates no A/C power or abnormal DC voltage range.
Red LED - Flashing indicates temperature or over/undervoltage condi-
tions.
Power Switch(es) - Rocker switch(es) control power to the power supply module(s).
A/C Power In - Accepts U.S. and other available international standard power cords.
• Fan Modules - Two (2) redundant, hot swappable fan modules. Each module contains
two (2) high-pressure, variable-speed fans for ample chassis cooling (160 CFM each).