StorCase Technology DS60 - Manual (Page 22)

DS60 User's Guide - Rev. C03 StorCase Technology, Inc.
Appendix D - Stacking Multiple Units 13
Appendix D - Stacking Multiple Units
The DS60 chassis is designed so that multiple units may be safely stacked on top of one another.
This can be accomplished by attaching the stacking feet between each Data Stacker chassis.
Each foot is attached to the chassis with a small pin snugly inserted into a hole on the bottom
of each chassis as shown in Figure D-1. The maximum number of units which may be stacked
depends on the input current rating of each chassis. The maximum current drawn from the base
unit must not exceed 6.0A (refer to the Input Current Rating in section "Appendix A -
Specifications/Dimensions" for further information).
Figure D-1: Stacking Multiple Units