StorCase Technology DS60 - Manual (Page 12)

Introduction 3
DS60 User's Guide - Rev. C03 StorCase Technology, Inc.
Figure 2: DS60 Front Panel
DS60 Front Panel
(See Figure 2)
• Chassis Power LED - Indicates that power is being supplied to the Data Stacker
chassis.
• Device Fault LED - Indicates that the installed device has a fault. This LED is housed
in the interchangeable drive bezel and provides connectors which can easily be
attached to the installed drive(s) within the Data Stacker chassis.
Note: Some drives may not provide Device Fault LED connectors.
• Device Activity LED - Provides a visual indication of drive activity. This LED is housed
in the interchangeable drive bezel and provides connectors which can easily be
attached to the installed drive(s) within the Data Stacker chassis.
• SCSI ID Select Switch - Front mounted and concealed behind a small sliding door
under the Data Stacker logo, this switch provides convenient SCSI ID selection. The
rotating switch can be adjusted with the provided tool (refer to section "Selecting the
SCSI ID Number" for additional information).
• Fan Speed Selector Switch - High and low speed. High speed (factory setting)
is suitable for all drive capacities but is recommended for drives exceeding 4GB. Low
speed may be used for removable media drives or drives with less than 4GB.
• Interchangeable Bezel - Accommodates removable media devices.