StorCase Technology DS321 - Manual (Page 15)

DS321 User's Guide - Rev. B00 StorCase Technology, Inc.
Installation 7
INSTALLATION
CAUTION: The DS321 chassis contains NO USER SERVICEABLE parts inside the unit.
Refer ALL servicing to qualified personnel!
NOTE: Refer to the Data Express DE110 User's Guide for additional operating and
installation information. Also refer to the disk manufacturer's documentation
for specific information regarding the disks.
Drive Preparation
1. Remove the drive from its protective packaging.
2. Plastic Drive Bezel: If the drive came equipped with a plastic front bezel, it must
be removed before installing the drive into the drive carrier.
3. In most cases, your drive will be factory-configured as a Master Drive using a jumper
option on the drive itself. StorCase however, recommends reconfiguring the drive
to Cable Select instead. This can be done by configuring the jumper option on the
drive itself (refer to the drive manufacturer's documentation for further information).
NOTE: Since specifications (specifically, pin assignments) between drive
manufacturers may vary, please refer to your drive manufacturer's
documentation for exact information regarding Cable Select configur-
ation.