Delphi SA10116-11B1 - Manual (Page 14)

Setting Up the Repeater Antenna
section two 4
Figure 2. Connect the repeater antenna and the A/C adaptor that came with your home system
to the back of your home stand as shown. If using a home kit, connect the ministereo (black
connector) to the jack labeled “LINE OUT” on the back of the home stand. If your receiver
does not have a built-in modulator or you choose not to use it, connect the red and white
connectors to the input jacks on your home stereo equipment you want to use. See your
satellite radio receiver user guide for more information. (Go to www.shopdelphi.com to
download a copy if you need a new one.)
Caution: Connect only appropriate input devices to your home stand. Connecting an
incorrect input device may damage the system and/or the external electronic device. It is
recommended that you use ONLY the A/C power adaptor that came with your home kit.