Speck Electronics EQ16 - Manual (Page 2)

Speck Electronics makes no warranty of any kind with regard to this material,
including, but not limited to, the implied warranties of merchantability and
fitness for a particular purpose. Speck Electronics shall not be liable for errors
contained herein or for incidental consequential damages in connection with the
furnishing, performance, or use of this material.
This document contains proprietary information which is protected by
copyright. All rights are reserved. No part of this document may be
photocopied, reproduced, or translated into another language without the prior
written consent of Speck Electronics.
The information contained in this document is subject to change without notice.
Speck Electronics products are warranted to the original owner to be free of
defects in material or workmanship.
This warranty does not apply to incandescent lamps, slide potentiometers, or
any product subject to accident, misuse, neglect or failure to comply with
normal maintenance procedures or if the serial number has been defaced,
altered, or removed; nor will Speck Electronics accept responsibility for
damages resulting from improper installation, alteration or unauthorized parts
or repairs. If the product is modified by the customer without permission, the
customer agrees to pay for parts and labor necessary to remove the modification
before repair. The cause of the defect is in the sole judgment of Speck
Electronics.
Should a defect develop within one year of purchase from Speck Electronics or
an authorized dealer, Speck Electronics will supply the part or parts necessary
at no charge. Labor is covered in this warranty for a period of one year.
Outside service, repairs or pickups are not covered under this warranty.
Any item returned for warranty repair should be sent, if possible, in the original
packing container, prepaid to Speck Electronics, 925 S. Main Street, Fallbrook,
California, 92028. If in our opinion the packing container is improper for
return shipping, we reserve the right to supply a new container at a minimal
charge.
In the interest of improving Speck Mixers and related products; designs and
specifications are subject to change without notice. It should be mentioned that
if a change is necessary for any reason, we make every effort to document
that change and send an "update notice" to all customers at no charge.
First Printing - January 1993
Second Prnting - March 1998
Notice
Warranty
ii
Edition