Sonnox Restore - Manual (Page 2)

2
The Oxford DeClicker
Description of Controls - DePop, DeClick and DeCrackle Sections
“Threshold” – This control is used to adjust a threshold level within the excitation profile to
capture an event. If a peak on the excitation profile is below the threshold, it will not be
registered as an event to be repaired. If a peak breaches the threshold line, then it is registered as
a detected event and can be repaired.
“Sensitivity” – This control determines whether detected events are discarded, starting with the
smallest. A low sensitivity means only the largest of the detected events go forwards to the repair
section.
“Enable” –With the section disabled, the detectors are still monitoring the audio and any
detected events are shown on the Events Graph as red bubbles. Setting the section IN will
present the detected events to the repair processing.