Sonnox Oxford Transient Modulator - Manual (Page 10)

3 DESCRIPTION OF CONTROLS
GAIN
Provides adjustment of gain from –24 to +24dB.
THRESHOLD
Adjusts the level threshold for the onset of processing.
DEADBAND
Controls the range of transient programme change that is ignored by the TransMod
process, from 0dB to 6dB.
EffectSection
RATIO
Controls the overall effect of the TransMod process. Positive settings produce
transient enhancement and negative settings cause reduction.
EFFECT meter
abovethe IN button Displays the peak overall gain and loss of transients in the
programme material resulting from the TransMod process between + 24dB and
-24dB.
IN button Switches effect in and out, maintaining constant delay and gain for
comparison purposes.
OVERSHOOT
Controls the timing profile of the transient modification.
OutputSection
RECOVERY
Controls the response of the TransMod process to long-term programme level
changes, from 3 to 200mS.
OVERDRIVE
Provides additional harmonic and overload enhancement effects to the TransMod
output signal, from 0% to 100%.
RISE TIME
Controls the response speed of the TransMod process to short duration envelope
transients, from 100µS to 30mS.
www.sonnox.com 10 Gotocontents