Danby DPAC10030 User Manual

Page 39

Remote Control Operating

Instructions (cont’d)

6. Swing: Press the “Swing” button to activate the

automatic air swing (oscillation) feature. The
symbol " "will appear in the display window
confirming the "swing" feature is activated. To
deactivate the “swing” feature, press the swing
button again.

7. RE-SET: Press the “re-set” button to cancel all

remote control programs. This will erase “all”
information contained within the remote control
display window (including time of day clock
setting).

8. +

C & F: Press either of the temperature

buttons to select (incresae / decrease) operating
temperatures. Press both button simultaneously
to switch from “Celsius” to “Fahrenheit”.

9. SLEEP: NOTE: The sleep mode feature can only

be programmed using the hand held remote
control.

The sleep mode allows you to program a set
cooling temperature that will gradually increase
the set operating temperature “+0.5ºC / 0.9º F”
(during night time sleeping hours) resulting in less
compressor running time saving energy
consumption and preventing the room from
becoming to cold during sleeping hours. See the
table below for temperature differentials during an
8 hour period.

EXAMPLE:

Time Period (Operation) Temperature Increase
(Above Set Temperature)

1st Hour +0.5ºC

2nd Hour +0.5ºC

3rd Hour +0.5ºC

4th Hour +0.5ºC

5th Hour +0.5ºC

6th Hour

+0.5ºC

7th Hour +0.5ºC

8th Hour Automatically returns to

Set Operating Temperature

1) Press the sleep button on the remote control.

2) The set temperature will appear in the display
window of the remote.

3) Press the temperature buttons to select
the required “set” operating temperature.

4) The unit is now programmed for sleep mode

NOTE: When turning off the main unit with the
remote control, there may be a delayed (off)
reaction (5-15 seconds) before the unit actually
stops. This is normal.

rnal Water Tank

Feature Works

LCD Window