Danby DPAC10030 - Manual (Page 28)

Auto-Timer Instructions
The AUTO-TIMER feature offers a unique selection
of multiple choice, fully automatic on/off (start/stop)
programs between 0 - 23 hrs, 59 min. under any one
mode of your Portable 3 Season Home Comfort unit.
The programs are as follows:
a) Auto -Off: Pre-select a time that will turn off the
unit (automatically) at a specified time (between
0 - 23 hrs, 59 min.). This function must be
performed daily, as the program is automatically
canceled/erased after the program has ended.
b) Auto-On: Pre-select a time that will turn on the
unit (atomatically) at a specified time (between
0 - 23 hrs, 59 min.). This function must be
performed daily, as the program is automatically
canceled/erased after the program has ended .
c) Auto-On & Auto-Off: Pre-select a time that will
turn the unit ON / OFF (automatically) at
specified times (between 0 - 23 hrs, 59 min.).
Unlike programs a) and b) above, this program
contains a built-in memory that automatically
stores into memory the selected times and will
repeat daily, (same specified times) until the
program is overridden and/or canceled.
However, any interruption in electrical power will
automatically cancel/erase all auto timed
programs. In the event this should happen, you
will be required to re-program your settings.
Setting the AUTO-ON TIMER
Before setting the AUTO-ON timer, the TIME OF
DAY CLOCK must be set/operational. You must
select all appropriate settings (i.e. MODE, FAN
SPEED, TEMP, HUMIDITY, SWING etc.) required to
operate under the AUTO TIMED program before
initiating the AUTO-ON program.
1) Select the appropriate MODE under which
you want the unit to operate (Auto-Cool-Dry-
Fan).
2) Select the appropriate FAN SPEED setting,
under which you want the unit to operate. (Auto,
Hi, Med, Low) (excluding Dehumidifying, as
this mode has “1” fan speed setting only).
3) Select SWING (oscillation) by pressing the
SWING key pad (the “ ” symbol will
appear in the display window).
14