Rupert Neve Portico 5012 - Duo Mic Pre-Amp - Manual (Page 9)

8
SPECIFICATIONS
Frequency Response:
Main Output, no load,
–0.2 dB @ 10 Hz
–3 dB @ 160 kHz
Buss Output measured at the 5014 Monitor Buss-mix Amplifier Output
–0.2 dB @ 10 Hz
–3 dB @ 160 kHz
Noise:
Measured at Main Output, unweighted, 22Hz-22kHz,
Terminated 150 Ohms.
With gain at unity
better than –100 dBu
With gain at 66 dB better than –62 dBu
Equivalent Input Noise better than –128 dBu
Noise Factor 1.5dB
High Pass Filters:
Continuously variable swept frequency from 20 Hz to 250 Hz.
Slope:
12 dB/Octave
Gain:
Unity to +66dB in 6 dB steps,
Trim continuously adjustable from –6dB to +6dB
Buss Output:
Output is designed to feed the 5014 Monitor Buss-mix Amplifier at the internal
system level of -2.5 dBu.
Output level of the 5014 is equal to that of the 5012.
Maximum Output Level:
Maximum output from 20 Hz to 40 kHz is +25 dBu.
Mute:
Mutes Main Output only.
Total Harmonic Distortion and Noise:
@ 1kHz, +20 dBu output:
Main Output:
Better than 0.001%
Buss Output measured at the 5014 Monitor Buss-mix Amplifier Output:
Better than 0.002%
@ 20Hz, +20 dBu output:
Main Output:
Better than 0.002%
Silk Engaged: Better than 0.2% Second harmonic
Crosstalk:
Measured channel to channel:
Better than –90 dB @ 15kHz.
Phantom Power:
+48 Volts DC +/- 1%
Power requirements:
Voltage range: 9 to 18 Volts DC
Current consumption:
@ 9VDC Current is 1.3 A typical: Power = 11.7W
@ 12VDC Current is 1.0 A typical: Power = 12.0 watts
@ 15VDC Current is 800 mA typical: Power = 12.0 watts
@ 18VDC Current is 650 mA typical: Power = 11.7 watts