Ruark Audio R7 - Manual (Page 12)

12
Connecting to a standard encrypted network
If your network is a standard encrypted (secure) network,
you will need to enter the password.
Rotate the CONTROL KNOB (10) to move the cursor to
the character you want to enter, then press SELECT (10).
When you have entered the complete password highlight
OK, then press SELECT (10). Selecting BKSP deletes the
last character and CANCEL returns to the previous menu.
Enter password
Pass
0123
4 56789 . _@ , abcdefghijklmnopqrs
tuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ”?
! ‘ ’ \~+*#$&()/ : ; <=>[ ]^{ } |
BKSP
OK
CANCEL
Connecting to an encrypted WPS network
If your network has WPS (Wi-Fi Protected Setup), it will
be identified by [WPS] before the network name. You can
connect using a password (recommended) or by either
pressing the WPS button on your router, or entering
the WPS PIN. If your R7 does not connect, select Enter
password and connect using a password.
Wi-Fi security
WPS PIN
Enter password (recommended)
WPS push button
9 Complete network setup
When your R7 connects to your network you will see a
confirmation screen. When prompted, press SELECT to
save the settings and exit the wizard.
Network wizard
Network wizard complete
Press ‘SELECT’ to exit
If your R7 fails to connect to the network, it will return to
the previous screen so you can enter the security settings
again. For more instructions on how to connect to your
network, see your router’s instructions.
10 Select a source
At the end of the initial setup, your R7 will display a menu
with a list of the available sources. Use the CONTROL
KNOB to choose a source and press SELECT.
Select source
CD player
Bluetooth
DAB radio
FM radio
Internet radio
RA R7 user guide.indd 12 31/10/2013 14:57:39