Dynex DX-KBOM2 User Manual

Page 3

Setting up the keyboard combo

Installing the receiver

To connect the receiver:

1 Turn on the computer.
2 Plug the USB connector of the receiver into the USB port on the

computer.

Adjust the two-channel switch on the back of the keyboard to eit

her

channel 1 or 2 to select the keyboard channel.

Adjust the two-channel switch inside the battery compartment of the
mouse to eit

her channel 1 or 2 to select the mouse channel.

Linking the mouse with the receiver

Note: Link the mouse and keyboard within the effective distance of

39 inches (1

meter) for the mouse and

59 inches (1.5

meter) for the

keyboard

To link the mouse with the receiver:

1 Turn on your computer.
2 Press the ID link button on the receiver. There will be a 15-second

delay while the receiver links to the keyboard and the mouse.
Within that 15-second delay:

• Press the ID link button on the keyboard, then press the ID link

button on the receiver.

• Press the ID link button on the mouse to complete the linking

process. The LED indicator on the receivers changes from
flashing to green.

The keyboard and mouse are designed with Smart Link. After the
linkage procedure is complete, you don’t have to re-link the
mouse, even if you change batteries or restart the computer.

3 If the mouse does not link with the receiver, repeat the ID linking

process in Step 2.

4 If there is interference when using the keyboard or mouse with

the selected channel, re-link the keyboard and mouse by
repeating Step 2. There are 256 changeable IDs for a single
channel.

Installing the driver

To install the mouse or keyboard driver:

Note:
The driver supports Windows 2000/ ME/XP.

1 Remove any existing mouse or keyboard drivers completely.
2 Insert the driver CD in your computer, then select the mouse or

keyboard driver to be installed.

3 Select a language for installation.

The operating system automatically installs the driver through
auto-install.

4 Restart the computer.

A Mouse icon will appear on the Windows task bar after you
successfully finish the installation.

A Keyboard icon will appear on the Windows task bar after you
successfully finish the installation.

Programming the mouse

A programmable key on the mouse allows you to set a number of mouse
properties.

To program the mouse:

1 Double-click the Mouse icon on the Windows task bar. A mouse

programming screen displays.

CH1

CH2

Channel switch